NEC UNIVERGE NEAX IPS-DML Phone Systems Go Back Back to #PrePage#
NEC UNIVERGE NEAX IPS-DML
The NEC UNIVERGE NEAX IPS-DML provides optimal performance in a pure converged IP network and supports numerous features and services which are not typically found in today's IP-based Telephony systems. It supports up to 888 peer-to-peer IP ports and 56 legacy TDM ports in a single modular chassis. It offers the full complement of NEAX features while utilizing less equipment and occupying less floor space.
Find NEC UNIVERGE NEAX IPS-DML Phone Systems dealers nearest you!
 
NEC UNIVERGE NEAX IPS-DML Phone System
 

NEC UNIVERGE NEAX IPS-DML
NEC UNIVERGE NEAX IPS-DML Benefits:
#ShuffleList(BenefitsList)#

NEC UNIVERGE NEAX IPS-DML
NEC UNIVERGE NEAX IPS-DML Features:
#ShuffleList(FeaturesList)#

NEC UNIVERGE NEAX IPS-DML Specifications:
Transmission Characteristics
Cross Talk Attenuation: More than 70 dB at 1000 Hz
Idle Circuit Noise: Less than -65 dBmp
Insertion Loss (relative to 1KHz-10 dBm)
    Station-to-Station: Typical 6 dB
    Station-to-Trunk: Typical 0.5 dB
    Trunk-to-Trunk: Typical 0.5 dB at 0 dB PAD control
Longitudinal Balance Trunk Side: Better than 58 dB
PCM Characteristics:
    Line Rate: 1.544 Mbps
    u-Law
    Law Meets North America TI-D4 Standards
Return Loss: More than 15 dB (300 ~ 3,400 Hz)
Line Impedance:
    Station: 600 ohms
    Trunk: 600 or 900 ohms
Leakage Resistance: More than 20,000 ohms


DTMF Frequencies
  1209Hz 1336Hz 1477Hz
697Hz 1 2 3
770Hz 4 5 6
852Hz 7 8 9
941Hz * 0 #


Ringing Signal
Frequency: 20 Hz (Nominal)
Signal Voltage: 75 Vrms (Nominal)
Interruption: (1) 2 sec. ON, 4 sec. OFF (external calls)
(2) 1 sec. ON, 2 sec. OFF (internal calls)
Note: Distinctive ringing is available for trunk routes and class of service options.

Heat Dissipation
PIM NO. MAX. AC POWER CONSUMPTION (W/H)* MAX. BTU (BTU/H)
1 145 494
2 290 988
3 435 1481
Note: 1 W/H = 3.4056 BTU

VARSearch currently features NEC UNIVERGE NEAX IPS-DML dealers from the following states:

#TheStateName#